Bissell 1698 Vacuum Cleaner User Manual


 
7
SmartMix Continued
Replace SmartMix Bottle.
Choose the SmartMix setting that fits the cleaning job.
Water Only- use for gentle cleaning or for the final
rinse after cleaning.
Normal- automatically provides the best mix of
water and cleaning solution for most cleaning jobs.
High Traffic- automatically mixes the right amount
of water and cleaning solution to dissolve tough
grime and heavy soil. Note: Residual cleaning
materials left in carpet from other products may
cause excessive foaming when picked up. If foam
is overflowing Tank, move SmartMix Dial to “Water
Only” position until the condition stops.
Note: Both the SmartMix Bottle and the clean
water Tank must have liquid in them in
order for the machine to spray. If one is
empty, the machine will temporarily lose
its prime and will not spray cleaning
solution or water only.
Important: If you are using the WATER ONLY
setting, fill the SmartMix Bottle with
water also!
The powered brush roll at the Floor Nozzle is designed to
enhance cleaning performance. The bristle pattern lifts out
the deep down dirt while gently grooming carpet fibres. The
floating suspension self-adjusts to all carpet heights. When
the machine handle is in the fully upright position, Carpet
Saver
automatically raises the brush off the carpet and
protects your carpet if you leave the Power Switch ON.
4.
5.
Tip:
Deep cleaning
stairs and high
traffic areas on a
regular basis
can prolong
carpet life.
DirtLifter
PowerBrush
WARNING:
To reduce the risk of fire,
use only BISSELL Advanced
Deep Cleaning Formulas for
full size machines in your
PowerWash ProHeat. Use
of cleaning formulas which
contain lemon or pine oil
may damage this appli-
ance and void the warranty.
Chemical spot cleaners or
solvent based soil removers
should not be used. These
products may react with
the plastic materials used
in your PowerWash ProHeat,
causing cracking or pitting.
SmartMix
Dial
HIG
H
TRAFFIC
W
ATER O
NLY
NORM
AL