Filter
Top Products
14
Choose the 4” Small Area Tool, the 3” Tough Stain Tool, or
the Spraying Crevice Tool and connect to the Flex Hose.
Plug into a proper outlet and turn Power Switch ON.
While pressing the trigger, slowly move the spraying tool back
and forth over the soiled surface. Release the trigger to suction
soiled water.
Continue to clean soiled area, working in small sections,
until no more dirt can be removed.
Caution: Do not overwet.
When the cleaning job is complete refer to the
Maintenance section on pages 15-16 for machine
cleanup and storage instructions.
The Bare Floor Tool provides effective cleaning for linoleum,
vinyl, and tile floors.
Caution: Do not use on hardwood floors.
Use BISSELL Floor Cleansing Formula the in SmartMix
Bottle.
Vacuum or sweep thoroughly to pick up loose debris and
pet hair.
Remove easily moved furniture from the room (chairs,
tables, etc).
Plan your cleaning route to leave an exit path.
Plan activities to allow 30 minutes for the floor to
dry completely.
Step on the Handle Release to lay the machine handle down.
Remove the Tank-in-Tank from the machine base.
Lift the machine base to expose the underside of the
Floor Nozzle.
Attach Bare Floor Tool to the Floor Nozzle with long Tab
to the right side (ReadyTools side) of the Floor Nozzle.
Cleaning Technique
1.
2.
5.
3.
4.
Cleaning Bare Floors
Attach the Bare Floor Tool
1.
2.
3.
4.
5.
1.
2.
3.
4.
Tilt
Handle
Back
Handle Release
Carrying
Bare Floor
Cleaning Tool
Snap Together
Bottom Front Edge of
Machine Base