Filter
Top Products
SmartTemp
™
Ready Light does not illuminate.
Possible Causes Remedies
The SmartTemp
™
switch is Turn On the SmartTemp
™
switch.
not turned ON.
The machine Power Switch is Both switches must be ON to activate the
not turned ON. SmartTemp
™
Ready Light.
SmartTemp
™
Power Switch does not illuminate.
Possible Causes Remedies
The machine Power Switch is Turn On the SmartTemp
™
switch.
not turned ON. Both switches must be ON to activate the
SmartTemp
™
Ready Light.
Reduced spray or no spray.
Possible Causes Remedies
Bladder may be empty. Refill tank with hot tap water.
SmartMix
®
Bottle may be empty. Fill with BISSELL chemical.
The filter may be clogged. Clean out filter, page 14.
Tanks may not be seated properly. Turn power OFF; remove and reseat tanks.
Pump may have lost prime. Turn power OFF; after 1 minute turn ON and
depress trigger.
The Pump Belt may be broken. Turn the machine OFF and unplug from the outlet.
To check if a Pump Belt has broken, you will need
a flat head screwdriver. Insert the blade end
into the lower slot of the Belt Access door to release
the lower snap. If necessary, insert the blade end
into the upper slot to release the upper snap.
Examine for belt breakage. You should be able to
see the Pump Belt looped around the white pulley.
If it is broken or missing, please refer to
Part Numbers and Descriptions on page 17
before calling Customer Service.
Complete installation instructions will accompany
the replacement belt.
15
Troubleshooting
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from
outlet before servicing.
Insert
Screwdriver
Blade Here
Lift Here