Bissell 1698 Vacuum Cleaner User Manual


 
11
How to clean upholstery and small areas
A
d
s
d
fd
d
g
h
g
bv
h
cv
b
b
j jkn
hn
b
j jk
vh
g
c
g
h
h
jj jh
ffhl k
llgh
Manufacturer’s Tag
Tip:
Deep cleaning
carpeting and
upholstery
regularly can
reduce dust and
allergens in
your home.
Important - Check Upholstery Tags:
1. Check manufacturer’s tag before cleaning. “W” or “WS”
on the tag means you can use your POWERSTEAMER
®
PROHEAT
PLUS. If the tag is coded with “X” or “S”(with a
diagonal strike through), or says “Dry Clean Only,” do not
proceed. Do not use on velvet or silk. If manufacturer’s tag
is missing or not coded, check with your furniture dealer.
2. Check for colourfastness in an inconspicuous place.
3. If possible, check upholstery stuffing. Coloured stuffing
may bleed through fabric when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris and pet hair.
Use a vacuum with a brush attachment and a crevice tool
to clean in fabric folds and tufts.
Machine Preparation:
6. Set up the machine following instructions in The Basics
section, pages 5-9.
7. Use BISSELL cleaning formula in the SmartMix
®
tank.
8. Set the ReadyTools
switch on Tools and PreTreat.
* SmartTemp
heats the cleaning solution for carpet
and bare floor application only. It does not heat
solution sprayed through the accessory tools.
9. Set SmartMix
®
to Normal.
Cleaning Technique
10. Choose the 4” Small Area Tool, the Tough Stain Brush, or
the Spraying Crevice Tool and connect to the flex hose.
11. Plug into a proper outlet and turn the Power switch ON.
12. While pressing the trigger, slowly move the spraying tool
back and forth over the soiled surface. Release the trigger
to vacuum soiled water.
13. Continue to clean soiled area, working in small sections,
until no more dirt can be removed.
Caution: Do not overwet.
14. When the cleaning job is complete refer to the Putting
it Away section for machine cleanup and storage
instructions, page 14.
Tip:
Try pre-treating
stairs or entry
ways with BISSELL
PROStrength
PreCleaner.
Then deep
clean with the
SmartMix
®
dial set on
High Traffic.