Filter
Top Products
SECTION: A- PUMP SPECIFICATIONS
DISCHARGE: 1-1/2", (38) N.P.T. Female, Vertical.
LIQUID TEMPERATURE:
Standard: 104°F (40°C) Continuous.
High Temp: 200°F (93°C) Continuous.
MOTOR HOUSING: Cast Iron ASTM A-48, Class 20 Min.
PUMP BODY:
BP27, A, D & HT Cast Iron ASTM A-48, Class 20 Min.
STRAINER:Standard: Polypropylene, .50 x .50 Slot Size
High Temp: Brass .22 x .22 Slot Size
IMPELLER: Design: 5 Vane, Open.
Material: Polypropylene.
SHAFT: Steel
SQUARE RINGS: Buna-N
HARDWARE: 300 Series Stainless Steel
PAINT: Air Dry Water Soluble Enamel
CABLE ENTRY: 10 ft. (25mm) Cord with Plug and
Pressure Grommet for Sealing and
Strain Relief.
SEAL: Design: Single Mechanical, Oil-Filled
Reservoir.
Material: Rotating Faces - Ceramic
Stationary Faces - Carbon
Elastomer - Buna-N
Hardware - 300 Series Stainless
SPEED: 1550 RPM
LOWER BEARING:
Design: Sleeve
MOTOR: Design: Oil-Filled.
Insulation: Class A.
SINGLE PHASE: Shaded Pole. Includes Overload
Protection in Motor.
FLOAT: BP27: None
BP27A: Wide Angle, Mechanical, 10ft Cable,
With Piggy-Back Plug.
BP27D: Diaphragm w/Piggy-Back Plug.
BP27HT Float Supplied seperately.
MINIMUM SUMP DIA: 18" (457mm)
9.55
(243)
1.32 (34)
7.29
(185)
3.89
(99)
120°
Pumping
Differential
3.25
(83)
6.75
(172)
SUCTION
1.50 (38) NPT
DISCHARGE
2.25 (57)
*9.00
(229)
* Factory Set, Adjustable.
BP27A,
BP27,
(Less Float)
BP27HT
with or without Float
inches
(mm)
9.55
(243)
9.90
(252)
1.32 (34)
6.75
(172)
3.25
(83)
SUCTION
2.25 (57)
1.50 (38) NPT
DISCHARGE
BP27D
3.89
(99)
4
Manual Index
HOME
MENU