Filter
Top Products
Baracoda RS232 dongle Plug & Scan – User Guide v3.28.2 - 5 -
Data Capture
for Workforce
in Motion
2.
2.2.
2. Technical Introduction
Technical IntroductionTechnical Introduction
Technical Introduction
2.1.
2.1.2.1.
2.1.
Hardware description
Hardware descriptionHardware description
Hardware description
Baracoda Serial Dongle has a 9-PIN SUB-D female (DCE) connector as shown in the Figure below.
Block diagram
3 ways available to power on the RS232 dongle Plug&Scan:
- With its External Power Adaptor.
- On the PIN9 of the RS232 connector if the Terminal gives 5V on this PIN.
- With its USB Power Adapter (“option not included with the product, please contact our Sales
Department to buy this accessory).
Note: The 4 switchs available on the front casing are not used to configure the RS232 dongle adapter. So you
can let all switchs to OFF.