![](http://pdfasset.owneriq.net/8/5d/85d3a24e-1a83-411b-a7c2-ae4beb929b80/85d3a24e-1a83-411b-a7c2-ae4beb929b80-bg11.png)
Baracoda RS232 dongle Plug & Scan
Only for BC2604/BL2604/B
Only for BC2604/BL2604/BOnly for BC2604/BL2604/B
Only for BC2604/BL2604/B
The Number of Beeps for ‘good scan’
Warning: These settings are only possible with BC/BL
disconnect the scanner (reading the “
“Connect barcode.”
Baracoda RS232 dongle Plug & Scan
– User Guide v3.28.2
Only for BC2604/BL2604/B
Only for BC2604/BL2604/BOnly for BC2604/BL2604/B
Only for BC2604/BL2604/B
LR2604 products
LR2604 productsLR2604 products
LR2604 products
The Number of Beeps for ‘good scan’
Warning: These settings are only possible with BC/BL
-
2604 scanners. After scanning the desired barcode,
disconnect the scanner (reading the “
D
isconnect barcode”), wait for ten seconds and connect again u
0 beep [default]
1 beep
2 beeps
3 beeps
- 17 -
Data Capture
for Workforce
in Motion
LR2604 products
LR2604 productsLR2604 products
LR2604 products
2604 scanners. After scanning the desired barcode,
isconnect barcode”), wait for ten seconds and connect again u
sing the
DISCONNECT