Filter
Top Products
6 P/N 118000 rev. A
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
sensor
configuration
sensor
configuration
Typical IP Address:
192.168.0.2
step 3
step 3
PC Configuration
1. Ethernet communication, configure the
IP address of your computer.
2. Install the PresencePLUS software
a. Insert the Installation CD
b. Click Install PresencePLUS Software
a. Right mouse-
click on Network
Neighborhood
and select
Properties
b. Open the TCP/IP Properties
under the Protocols tab
c. Change the IP address to
192.168.0.2 and subnet
mask to 255.255.255.0
Write down the existing address of your PC before changing it: _ _ _ • _ _ _ • _ _ _ • _ _ _
To change the IP address of your PC, do the following:
(The following screen captures are from Windows NT; other Windows versions vary.)
Sensor
Default IP Address
192.168.0.1
Ethernet communication, configure the
192.168.0.1