Filter
Top Products
5
Change the Battery
• Turn the water off at the supplies.
• Both models: Remove the set screw
from the rear of the faucet with a 2.5
mm allen wrench (1).
• Model 15100 only: Remove the
temperature control handle (2)
• Pull the faucet housing off
• Pull the out battery out and put the new
one in (3, 4).
• Reassemble the faucet and test.
If the flow is unsatisfactory:
Clean the aerator
• Cover the sensor for 5 seconds (1).
• Remove the aerator (2).
• Flush the aerator thoroughly and
reinstall.
Clean the filter screens
• -Turn the water supplies off.
Disconnect the supply hoses.
• Remove and clean the filter screens
(2).
• Reinstall the filter screens. Reconnect
the hoses.
• Turn the supplies on.