4
Model 15101XX1
• Turn on the water supplies (1).
Remove the protective cover from the
sensor (2). Wait 15 seconds (3).
• Place your hand in front of the sensor
to turn the water on (4). Check the
temperature of the water.
• If adjustment of the temperature is
necessary, turn the water off at the
supplies (1). Remove the set screw
from the rear of the faucet using a
2.5 mm allen wrench (2).
• Pull the faucet housing off (1).
• Use a slot-head screwdriver to adjust
the temperature control screw (2).
Turn it clockwise to make the water
warmer, counter-clockwise to make
the water cooler.
• Re-assemble the faucet and turn the
water on. Test again. Repeat the
process if necessary until the desired
temperature is reached.
Clean the Sink
• Cover the sensor for 5 seconds (1). The
faucet will be shut off for approximately
75 seconds to permit cleaning (2).