Filter
Top Products
3
Installation Instructions
• Remove the mounting nut, metal washer, and fiber washer from
the faucet.
• Place the faucet with sealing gasket on top of the sink.(1)
• From beneath the sink, install the fiber washer, metal washer,
and mounting nut (2).
• Install the adapters to the hot and cold stops (3). Attach the
check valves and filter screens to the adapters (4). Attach the
hoses to the check valves (5) using two wrenches, as shown.
Take care not to twist or kink the supply hoses.
Model 15100XX1
• Turn on the water supplies (1). Remove
the protective cover from the sensor (2).
Wait 15 seconds (3).
• Place your hand in front of the sensor to
turn the water on (4).
• Adjust the temperature of the water with
the lever on the side of the faucet. Pivot
it forward to obtain cooler water,
backward to obtain warmer water.