Filter
Top Products
42
Plumbing Schematics – Flow 30 to 70-GPM
(continued)
For proper operation and maximum efficiency, piping coming from the pump and filter MUST be con-
nected to the "IN" port of the heater. Likewise, connect piping returning to the pool/spa to the "OUT"
port of the heater. See drawing below.
PLUMBING CONNECTION DETAIL
From Pump/Filter
Return to Pool/Spa
Plumbing Requirements
INSTALLATION
Water IN & OUT Connections- Typical
(exact location varies by model)
HEAT PUMP WITH GAS HEATER BACK UP
MULTIPLE HEAT PUMP INSTALLATION
MINIMUM 30 GPM TO EACH HEATER
MINIUM SPACING 24-INCHES