APC NS1435A Indoor Furnishings User Manual


 
9NetShelter CX Enclosure: Installation and Customization
Removing and Installing Fan Modules
Unlock the fan module
Open the right hand side panel.
Unscrew the thumbscrew on the right side of the fan
module to unlock the fan module so it can be opened.
Lock the fan module
Open the right hand side panel.
Install the thumbscrew on the right side of the fan module
to lock the fan module in place.
Removing the fan module
Start at the top when removing the fan modules.
1. Detach the clip.
2. Swing the fan module out on its hinges.
3. Disconnect the fan module power supply plug from
the fan module.
4. Lift the fan module from the hinges attached to the
enclosure.
Installing the fan module
Reverse the procedure to install the fan module.
ns1457c
ns1973a
ns1972a