Filter
Top Products
Tampers & PAs
Your security system protects itself against tampering. In the event of any control
equipment, detectors or sounders being opened or cables being cut the internal
and/or the external will sound. Dependant on the level of system you have installed
this may require an engineer call-out to reset the system.
The keypad (onboard or remote) is also protected. If more than 24 invalid digits are
pressed an internal alarm will be generated if the system is unset or a full alarm will
be generated if the system is set.
Your installer may have fitted various PA (Personal Attack) buttons on to your system
and instructed you on the use of them. You can also activate a PA by pressing keys
1 & 3 together.
To Activate PA from Keypad
PA is a 24 hour function and will operate if the system is set or unset.
To Silence Sounders After PA Activation
Unset & Set Display Status
The following shows the display status when the system is Set and Unset
&
Together = PA
The system is Unset
(Day Mode)
Only PA and Tampers are active
The system is Set
All or Part of the system is active