Filter
Top Products
AIRSTREAM LAND YACHT GAS
Moen Two Handle Lavatory Faucet
Moen Model 4720
USA Canada
Moen Inc. Moen Inc.
25300 AL Moen Dr 2816, Route Bristol, Oakville
North Olmstead, OH. 44070-8022 Ontario, L6H5S7
1-800-Buy-Moen (289-6636) 1-800-465-6130, Toronto: 905- 829-3400
Care Instructions for the Non-Tarnish Finish
As with any fine polished surface, your faucet will retain its shine for years to come with proper care. The
LifeShine TM finish on this faucet does not require the extraordinary work needed to maintain most fine
polished brass finishes.
Be sure to read and follow usage instructions enclosed with any scour pad or scrub sponge before use.
•
Caution: Do not use pads or sponges that specifically do not recommend use for cleaning
polished surfaces.
•
Caution: Many pads or sponges with green fibrous surface (such as Scotch-Brite TM heavy
duty scrub sponges) contain microscopic mineral particles that can scratch nearly all polished
surfaces, including this faucet finish.
The LifeShine TM finish can be cleaned with most household cleaners (including mild abrasives), when
used according to their manufacturers instructions for use.
• Rinse any strong cleaners off immediately after use to maintain the LifeShine TM finish luster.
Mild scrubbing with fine steel wool (0000 grade) can remove built up dirt or water stains.
Visible water spots on this highly lustrous and reflective finish can be easily wiped off with a cloth
dampened with water or with glass cleaner.
Moen Cartridge Removal
CAUTION: Always turn water OFF before
removing or disassembling the valve. Open valve
handles to relieve water pressure to insure that
complete water shut-off has been achieved.
1. Holding the handle (2) or (18) with one hand,
unscrew the handle hub (9) counterclockwise and set
aside.
2. Unscrew the cartridge nut (11) counterclockwise.
3. Grasp the cartridge stem with pliers being careful
not to damage stem and pull straight up.
4. To reassemble, reverse the previous steps. Turn the cartridge stem to ON position, so that the hole in the
piston lines up with the hole in the outer shell. Plush the cartridge straight down into the body making sure
the key on the cartridge fits into the notch in the body. This will correctly position the cartridge. Replace
the cartridge nut, start by hand, DO NOT CROSS THREAD, and tighten firmly.
In the US call Moen’s toll free Help line number, 1-800-Buy-Moen (289-6636) for answers to any product,
warranty, or installation questions.
In Canada call 1-800-465-6130, Toronto: 905- 829-3400.
G-16