Filter
Top Products
®
IR
IR
When the fi rst bar on the
Filter Life LCD is blinking, it
means the HEPAfast fi lter
needs replacement. Follow the
instructions above to remove the
dirty and install new ones.
Press the “Reset” button on the
Control Panel to reset the fi lter.
The fi lter life gauge should reset
to 6 full bars.
Replacing the HEPAfast fi lter
Replacing the Titanium Pro® module
When “Light bulb” sign on
the control panel is blinking, it
means the Titanium Pro
®
module
needs replacement. Follow the
instructions above to remove the
used Titanium Pro
®
and install
a new one. Press the “Reset”
button on the Control Panel to
reset. The “light bulb” will stop
blinking.
20
®
All other elecTRONICCOMPONENTSOFTHEUNITSUCHASMOTORFANAREMAINTENANCE-free
Cleaning the Housing and Sensor
Our unique Airgle
®
system design includes
a rear door with a grill that acts as a fi lter
for human hair and large particles. This
helps the life of the Gas & Odor fi lter,
the HEPAfast fi lter and the Titanium Pro
®
module (if installed). Use your vacuum to
clean the grill on the rear door.
The sensor and housing can be cleaned,
using lukewarm water and a small amount
of detergent.
.
The art of purifi cation
The art of purifi cation
21
filter