Filter
Top Products
Pg. 4
MAIN MENU (Continued):
5. Set Timer:
Operation Timer (15 to 99 seconds)
Program Timer (30 to 99 seconds)
Operation Timer sets the length of time from when the last button is pressed on the keypad until the system
resets to standby mode, displaying the scrolling welcome message.
For example, if someone is scrolling through the names, then stops without pressing the “bell” button, and if
the operation timer is set to 15 seconds, the welcome message will reappear in 15 seconds.
Program Timer sets the length of time the GF-NS/A will stay in program mode while manually entering data. If
the timer is set for 60 seconds, it will automatically return to the welcome message if no buttons are pressed
on the keypad for 60 seconds. This protects the system from being left in program mode accidentally.
6. Change Greeting
Text that scrolls on LCD display while system is not in use (standby mode)
1. Typing in “Caps Lock” mode, enter the text that you would like to have appear on the LCD screen while
the system is in standby mode.
2. Capital alphabetical characters only are allowed in this field, not numbers. Symbols allowed are as follows
(, . / -)
3. A maximum of 160 characters, including spaces are allowed. If the content is longer than 16 characters,
the text will scroll on the top line of the LCD display.
4. The scroll rate of the welcome message is not adjustable.
1. Enter the desired length of time in seconds for the
operation timer.
2. Enter the desired length of time in seconds for the
program timer.
3. Click OK.