Filter
Top Products
Software Program to load Data into GF-NS/A Digital Display Module
- INSTRUCTIONS -
IMPORTANT! Read these instructions before loading or editing data in the GF-NS/A Digital Name
Scrolling Module for the GF series multi-unit entry system.
This software program allows you to use a computer to load the following information into the GF-NS/A.
Note that you will need to use a computer with a serial port along with the supplied connecting cable to plug
into the GF-NS/A. If only a USB connection is available, then a USB to serial adapter will be needed.)
1. Select Language for use while programming (5 language options)
2. Change ID Code (4-digit code to get into program mode of unit)
3. Change Access Code (Up to 20 ID codes can be programmed to activate door release via keypad)
4. Resident Information (3- or 4-digit dialing codes and resident names. Max. 250 resident locations.)
5. Set Timer. Operation Timer = length of time until system returns to standby mode after being used.
Program Timer = length of time unit stays in program mode after last information is entered.
6. Change Greeting (Scrolling message that appears when system is in standby mode. Max. 160 characters.)
PROGRAM SCREENS:
Pg. 1
0905
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:
1-800-692-0200
FAX 1-800-832-3765