Filter
Top Products
1 - General Information
10
Safety Considerations
This ac source is a Safety Class 1 instrument, which means it has a protective earth terminal. That
terminal must be connected to earth ground through a power source equipped with a ground receptacle.
Refer to the Safety Summary page at the beginning of this guide for general safety information. Before
installation or operation, check the ac source and review this guide for safety warnings and instructions.
Safety warnings for specific procedures are located at appropriate places in the guide.
Options, Accessories, and User Replaceable Parts
Table 1-1. Options
Option Description
400 Input power 360-440 Vac, three-phase, 47-63 Hz
1CM 2- Rack mount kit (Agilent 5062-3977)
Support rails (Agilent 5064-0001) are required (rails are not included in rack mount kit).
Table 1-2. Accessories
Item Agilent Part Number
Fuse replacement kits
30AM for 180-235 Vac, 3-phase line
GPIB cables
0.5 meters (1.6 ft)
1.0 meter (3.3 ft)
2.0 meters (6.6 ft)
3.0 meters (13.2 ft)
Heavy duty slide mount kit
5060-3513
10833D
10833A
10833B
10833C
5063-2310
Table 1-3. User Replaceable Parts List
Description Agilent Part No.
Rack mount kit See “Options”
Slide mount kit See “Accessories”
7-terminal sense connector plug 1252-3698
Sense connector cover 4040-2268
4-terminal digital connector plug 1252-1488
AC input safety cover (with strain relief and brushing) 5001-9837
Screw (4), ac input safety cover (6-32 x 1.5in) 2360-0405
Screw (8), ac input barrier block (8-32 x 5/16in) N/A
AC output safety cover 5001-9811
Screw (2), ac output safety cover (6-32 x .3in) 2460-0012
Screw (8), ac output barrier block (10-32 x .37in) N/A
Fuse safety cover 5001-9810
Screw (2), fuse safety cover (6-32 x .3in) 2460-0012
User’s Guide (this manual) 5962-0887
Programming Guide 5962-0889
Quick Start Guide 5962-0883
Quick Reference Card 5962-0885
Appropriate Agilent Regulatory Test Solution Software Agilent 14761A, 14762A, 14763A