ADT Security Services Security System Home Security System User Manual


 
Ð 35 Ð
SUMMARY OF AUDIBLE/VISUAL NOTIFICATIONS
(ENGLISH DISPLAY TOUCHPADS)
SOUND CAUSE DISPLAY
LOUD, INTERRUPTED
*
Touchpad & External
FIRE ALARM MANUALLY
ACTIVATED
FIRE is displayed; zone number 95 is displayed.
LOUD, CONTINUOUS
*
Touchpad & External
BURGLARY/AUDIBLE
EMERGENCY ALARM
ALARM is displayed; zone number of zone in alarm is also displayed.
ONE SHORT BEEP
(not repeated)
Touchpad only
a. SYSTEM DISARM
b. SYSTEM ARMING ATTEMPT
ÊÊÊÊWITH AN OPEN ZONE.
c. BYPASS VERIFY
a. READY indicator light comes on when system is disarmed.
b. The number of the open protection zone is displayed.
c. Zone numbers of the bypassed protection zones are displayed (one beep is
ÊÊÊÊheard for each zone displayed). Subsequently, the following is displayed:
ÊÊÊÊBYPASS and READY
ONE SHORT BEEP
(once every 40 seconds)
Touchpad only
a. SYSTEM IS IN TEST MODE
b. LOW BATTERY AT A
ÊÊÊÊTRANSMITTER
a. Opened zone numbers will appear.
b. BAT displayed with zone number of transmitter.
TWO SHORT BEEPS
Touchpad only
ARM AWAY AWAY or INSTANT is displayed. Red ARMED indicator is lit.
THREE SHORT BEEPS
Touchpad only
a. ARM STAY OR INSTANT
b. ZONE OPENED WHILE SYSTEM
ÊÊÊÊÊIS IN CHIME MODE.
a. STAY or INSTANT is displayed. Red ARMED indicator is lit.
b. CHIME displayed; zone number of open protection zone will be displayed if
ÊÊÊÊthe [] key is pressed.
RAPID BEEPING
Touchpad only
a. TROUBLE
b. MEMORY OF ALARM
c. SYSTEM LOW BATTERY
d. EXT. SOUNDER WIRING FAIL.
a. CHECK displayed. Zone number of troubled protection zone is displayed.
b. ALARM is displayed; zone number of zone in alarm is displayed
c. BAT displayed with no zone ID number.
d. CHECK 70 is displayed.
SLOW BEEPING
Touchpad only
a. EXIT DELAY WARNING (if
ÊÊÊÊprogrammed)
b. ENTRY DELAY WARNING
a. AWAY or AWAY & INSTANT is displayed.
b. Exceeding the entry delay time without disarming causes alarm.
*
If a bell is used as external sounder, burglary/audible emergency is
steady ring
.