Filter
Top Products
Ð 34 Ð
QUICK GUIDE TO SYSTEM FUNCTIONS
FUNCTION PROCEDURE COMMENTS
Check Zones Press READY key. To view faulted zones when system not ready.
Arm System Enter code. Press arming key desired:
(AWAY, STAY, INSTANT)
Arms system in mode selected.
Quick Arm
(if programmed)
Press #. Press arming key desired:
(AWAY, STAY, INSTANT)
Arms system in mode selected, quickly and without use of code.
Bypass Zone(s) Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Bypassed zones are unprotected and will not cause an alarm if violated.
Quick Bypass
(if programmed)
Enter code. Press BYPASS key. Bypasses all faulted zones automatically.
Silence Sounders
Burglary:
Fire:
"Check":
Enter code. Press OFF key.
Press OFF key.
Press any key.
Also disarms system. Memory of alarm remains until cleared.
Memory of Alarm remains until cleared.
Determine cause.
Disarm System Enter code. Press OFF key. Also silences sounders. Memory of alarm remains until cleared.
Clear Alarm Memory After disarming, enter code again.
Press OFF key again.
Touchpad will beep rapidly upon entry if alarm has occurred.
Alarm display will remain upon disarming until cleared.
Duress (if active
and connected to
Customer Care Center)
Arm or disarm "normally", but
use your 4-digit Duress code to do so.
Performs desired action and sends silent alarm to Customer Care Center.
Panic Alarms
(as programmed)
Press key [A], [B], or [C] for at least 2 seconds See the PANIC KEYS section for functions programmed for your system.
Keys ÒAÓ and ÒBÓ may have been programmed for single-button arming
(see ARMING PERIMETER ONLY and ARMING ALL PROTECTION
sections).
Chime Mode
To turn ON or OFF:
Enter code. Press CHIME key. Touchpad will sound if doors or windows are violated while system is
disarmed and chime mode is ON.
Test Mode
To turn ON:
Enter code. Press TEST key.
To turn OFF:
Enter code. Press OFF key.
Tests alarm sounder and allows sensors to be tested.
Phone Access
(Smartphone Module)
if applicable
Consult
Phone Access User's Guide
that
accompanies the Phone Module.
Permits system access remotely, via Touch-tone phone (see pages 6).