Admiral AAW-15CM1FHUE Air Conditioner User Manual


 
Mode button
Each time Mode button is pressed, the operation
mode is changed in sequence:
COOLING FAN ONLY ENERGY SAVING COOLING
Button
The air conditioner will be started when it is energized
or will be stopped when it is in operation, if you press
this button.
Control Panel
You can easily operate this air conditioner by pressing
relevant button on the control panel as well as the
remote control.
Indication symbols of LED on control panel :
High fan speed
Medium fan speed
Low fan speed
Auto fan speed Cooling
Fan only
Display set temp
Display set timer
Timer
LED on control panel lights on when the relevant mode is in used.
Energy-saving
NOTE: After setting the mode, allow 3 minutes before
switching to another mode.
In the FAN ONLY Mode, Room Temperature display range
is from 0 (32 ) to 38 (99 ).
Room Temperature below 32 ,the Temperature display L0.
Room Temperature above 99 ,the Temperature display H1.
NOTE: Temperature setting range is from 19 (66 ) to 31 (88 ).
Fan Speed button
Used to select fan speed in sequence auto, low,
medium and high.
Timer button
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER.When the unit is off, you can set ON TIMER.Timer
setting range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER
will be cancelled.
If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel
ON TIMER, press TIMER button.
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time,the temperature LED display will alternate between and .
Button
Electronic
Control Panel Model
Heating
Fan
Speed
Mode
Timer
Airconditioner
14
OPERATING INSTRUCTIONS
ELECTRONIC CONTROL PANEL MODEL
NOTE: After setting the mode, allow three (3) minutes before
switching to another mode. In the FAN ONLY Mode, Room
Temperature display range is from 0°C (32°F) to 38°C (99°F).
Room Temperature below 32°F, the Temperature display L0.
Room Temperature above 99°F, the Temperature display H1.
If the OFF TIMER is set, the time LED displays the remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER
will be cancelled.
If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel
ON TIMER, press TIMER button.
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time, the temperature LED display will alternate between °C and °F.
NOTE: Temperature setting range is from 19°C (66°F) to 31°C (88°F).
WAC 8-24 USER MAN FINAL 3/2/05 12:13 PM Page 16