Filter
Top Products
Mounting
1) Remove the mounting bracket template (see page10) fromthismanual. Tape it to the wall where the mounting bracket is to be installed.
2) Install mounting screws (not included) into each of the keyhole locations on the template. Be sure to leave a 1/8” to 1/4” space
between the bottom of the screw head and the wall so that the bracket can be hung.
CAUTION: Mounting hardware and mounting location must be capable of supporting a minimum of 30lbs (13.6 kg).
3) Hang the Bracket/Tank Assembly from the mounting screws.
4) Once the bracket is hung, tighten the mounting screws so that the bracket is snug between the screw and the wall.
To reduce the risk associated with property damage due to water leakage:
• Before starting installation, shut off main water supply and drain pipes.
• Take care when using pliers or pipe wrenches to tighten plastic fittings, as damage may occur if overtightening occurs.
• Do not install in direct sunlight or outdoors.
•Do not install near water pipes which will be in path of a drilling tool when selecting the position to mount the bracket.
• Mount filter in such a position as to prevent it from being struck by other items used in the area of installation.
• Ensure that the location and fasteners will support the weight of the system when installed.
CAUTION
4