COURIER HIGH SPEED MODEMS
Alphabetical Command Summary C-19
%E=4 Erase phone numbers in accounts 0−9.
%E=5 Disable Account, Dialback, and New Number fields in
accounts 0−9 disabled.
%Fn Remotely configure data format. See Appendix D.
%F0 No parity, 8 data bits.
%F1 Mark parity, 7 data bits.
%F2 Odd parity, 7 data bits.
%F3 Even parity, 7 data bits.
%L= Assign an account password as the local access password. See
Appendix D.
%N Works in conjunction with &Xn in synchronous mode. If the
modem is set so that it is the source of the Transmit clock timing
signals (&X0default), the %Nn commands set the computer or
terminal-to-modem V.25 bis clock speed. If the modem is set to
&X1, the computer is the source of the Transmit clock signals.
If %Nn is set to 0 or 1, you will receive an error message, since
they are not valid values. The %Nn rates are as follows:
%N0 Reserved %N6 9600 bps (default)
%N1 Reserved %N7 12.K bps
%N2 1200 bps %N8 14.4K bps
%N3 2400 bps %N9 16.8K bps
%N4 4800 bps %N10 19.2K bps
%N5 7200 bps
%Pn= Disables password security (n=0 or 1) when no character
follows the equal sign. See Appendix D.
%Pn=s Specify the following password string (s) for viewing privileges
only (n = 0) or view and configuration privileges (n= 1). See
Appendix D.
%Pn? Display password n. See Appendix D.
%S=n Obtain access to security accounts without disabling security.
See Appendix D.
