A SERVICE OF

logo

4.21 Direct Play Button Board 4 Replacement Procedures
Installing the Direct Play Button Board
To install the direct play button board, follow the steps below and refer to the figure in the
preceding section.
1. Secure the direct play button board to the bracket with two M2×3 screws.
2. Secure the combined unit to the direct play cover assembly with one M2×3 screw.
3. Seat the direct play cover assembly and secure with two M2.5×6 screws.
4. Attach the direct play button FFC to the system board.
Satellite P20 Series Maintenance Manual 4-63