A SERVICE OF

logo

4 Replacement Procedures 4.19 Display Assembly
4.19 Display Assembly
Removing the Display Assembly
To remove the display assembly, first remove the battery pack, then follow the steps below.
1. Turn the computer upside down and loosen two embedded screws securing the
wireless LAN compartment cover.
2. Lift off the wireless LAN compartment cover.
Fig 4-29: Removing the wireless LAN compartment cover
3. Detach the two ends of the wireless LAN antenna.
4. Remove the keyboard, HDD, main module and top cover.
5. Feed the wireless LAN antenna through the system board.
4-54 Satellite P20-25 Series Maintenance Manual