A SERVICE OF

logo

4 Replacement Procedures 4.24 Display Mask
Installing the Display Mask
To install the display mask, follow the steps below and refer to figures 4-38.
1. Place the display mask on the LCD module.
2. Engage the latches of the display mask.
3. Secure the display mask with the following screws.
M2.5×6B FLAT HEAD screw ×2
M2×4B S-FLAT HEAD screw ×3
4. Stick the four rubber masks at the top of the display mask.
5. Stick the two mask seals at the lower part of the display mask.
4-62 Satellite M30-35 Maintenance Manual (960-455)