A SERVICE OF

logo

4 Replacement Procedures 4.10 Switch cover ASSY/Switch membrane
2. Pull up the insulator.
3. Disconnect the switch membrane cable from the connector PJ7001 on the system
board.
4. Remove the following screws fixing the switch membrane.
M2.5×4B FLAT HEAD screw ×2
5. Remove the switch membrane by lifting up the left side of the switch membrane.
Switch membrane
M2.5
×
4B FLAT HEAD
Insulator
PJ7001
Figure 4-14 Removing the switch membrane
4-30 Satellite M30-35 Maintenance Manual (960-455)