A SERVICE OF

logo

4 Replacement Procedures 4.7 Memory module/ Modem Daughter Card
Installing the Modem Daughter Card
To install the modem daughter card, follow the steps below and refer to figures 4-9.
1. Connect the modem cable to CN1 on the modem daughter card.
2. Connect the modem daughter card to the connector PJ3000 on the system board.
CAUTION: Be careful not to damage the card or connector.
3. Secure the modem daughter card with the following screws.
M2×4B BIND screw ×2
4. Place the memory slot cover and secure it with the screw (e-ring).
4-22 Satellite M30-35 Maintenance Manual (960-455)