A SERVICE OF

logo

Station Apparatus
2000-series Telephones
Strata CTX I&M 06/04 11-47
Station Apparatus
3. For the BVSU only, make sure that the SW1 and SW2 pins are set per Figure 11-30 and Table
11-5 on page 11-5.
Figure 11-30Speaker Off-hook Call Announce Upgrade (BVSU1A)
4. Position the BVSU/DVSU PCB on the
standoffs), and secure with the four
provided screws (see Figure 11-31).
5. Connect the BVSU/DVSU wire plugs to
the VSU connectors on the PCB inside
the phone.
6. Reinstall the telephone base. Secure it
with its four captive screws.
6073
BVSU1A
HFU
SPF
SW2
SW1
20 Mu
20 A
30
Move jumper to
the middle position
(20 Mu) for
DKT2000 phones
To PCI/VSU
Connectors
on Telephone
Red Wire
Fasten
Four
Screws
6072
Figure 11-31 BVSU/DVSU Installation