4 © Titan Tool Inc. All rights reserved.
Table of Contents
Safety Precautions ................................................................... 2
Grounding Instructions ........................................................ 3
General Description ................................................................. 4
Specications ...................................................................... 4
Preparing to Paint .....................................................................4
Attaching the Tip to the Gun................................................ 4
Checking the Outlet Valve (optional) ................................... 4
Attaching the Paint Hose ..................................................... 5
Pressure Relief Procedure....................................................... 5
Priming ...................................................................................... 5
Preparing to Prime .............................................................. 5
Mounting the Paint Hopper.................................................. 6
Attaching the Return Tube .................................................. 6
Priming the Pump ................................................................ 6
Spraying .................................................................................... 7
Spraying Technique ............................................................ 7
Practice ............................................................................... 7
Cleanup ..................................................................................... 8
Overnight Storage ............................................................... 8
Long-Term Storage ............................................................. 8
Maintenance ............................................................................ 10
Removing and Cleaning the Inlet Valves .......................... 10
Removing and Cleaning the Outlet Valve ......................... 10
Cleaning the Hopper Screen ............................................. 10
Troubleshooting ..................................................................... 11
Parts Listings .......................................................................... 16
Main Assembly .................................................................. 16
Diaphragm Pump .............................................................. 17
Pump Head Assembly ....................................................... 18
Hopper Assembly .............................................................. 18
Limited Warranty .................................................................... 20
General Description
This high performance airless sprayer is a precision power tool
used for spraying many types of materials. Read and follow this
instruction manual carefully for proper operating instructions,
maintenance and safety information.
Pressure Control
Knob
PRIME/SPRAY
Knob
Paint Hopper Return Tube
Outlet Valve
Power Cord
Preparing to Paint
Attaching the Tip to the Gun
1. Lock the trigger by rotating the trigger lock forward until it
stops.
Trigger locked
(gun will not spray)
Trigger unlocked
(gun will spray)
POSSIBLEINJECTIONHAZARD.Donotspray
without the tip guard in place. Never trigger the gun
unless the tip is in either the spray or the unclog
position. Always engage the gun trigger lock before
removing, replacing or cleaning tip.
2. Thread the tip guard onto the gun. Tighten the nut rst by
hand, then tighten more rmly with a wrench.
NOTE: When attaching the tip guard to the gun, align
thetipguardasshowninthegurebelow,then
tighten with a wrench.
Begin
tightening
the tip guard
at this angle
to achieve
the desired
spray angle
when tight.
Checking the Outlet Valve (optional)
1. Firmly press the optional pusher valve button on the side
of the pump housing to make sure the outlet ball valve
moves freely.
Pusher Valve Button
(optional)
