4 – Command Reference
Command Syntax
4-10 SN0054659-00 A
S
FRU
Saves and restores the router’s configuration.
Authority Admin session to restore.
Syntax fru
restore
save
Keywords restore
Requires that you first ftp the tar file containing the desired configuration to the
router. After you enter this command, it prompts you to enter the restore level. You
can fully restore the router’s configuration (all configuration parameters and LUN
mappings) or restore only the LUN mappings. The restored configuration will not
take effect until you reboot the router.
save
Creates a tar file containing the router’s persistent data, configuration, and LUN
mappings. It stores the file in the router’s /var/ftp directory. You must then
ftp the tar file from the router.
Examples FRU restore command example:
QRouter (admin) #> fru restore
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take effect.
FRU save command example:
QRouter (admin) #> fru save
FRU save completed. Configuration File is QLogic_Router_FRU.bin
Please use FTP to extract the file out from the System.
