Current projection source Second source + / –
(in PIP window or second window)
Wireless data
(cClear Wireless version only) CVBS –
S-Video –
R, G, B/CVBS –
Y, C b, C r –
Y, C b, P r +
Data 2 –
Data 1 (analog) +
Data 1 (digital) +
Picture Format
‘Picture Format’ is used to select one of six picture format options (wide screen, super zoom
4:3, 4:3, movie expand 14:9, movie expand 16:9, 16:9 subtitles). For both video signal and
computer signal input the last selected picture format (beforethe projector was switched off)
will be selected again.
1 Press Menu.
– The menu bar appears on the screen.
2 Use Cursor Control to select ‘Picture format’ in the ‘Picture’ menu.
3 Use Cursor Control to select the required picture format (wide screen, super zoom 4:3, 4:3,
movie expand 14:9, movie expand 16:9, 16:9 subtitles) and confirm by pressing OK.
– The picture format has now been set.
Due to the scaling of the image when the picture format is changed, it might be possible that a part
of the actual image is missing at the top or the bottom of the screen.With Cursor Control you can
adjust the position of the projected image upwards or downwards.
Note
5. Operation
Philips Multimedia Projector 38 English User guide cClear
On Screen Display Menu >
