General
Notes
Messages
>
1 Press the Standby button on projector or remote control to switch on the projector.
– The Standby indicator lights up orange.
– When the projection lamp is on, the Standby indicator lights up green and the start-up
screen (when enabled) appears for several seconds.
2 Switch on the computer or start video playback.
– A feedback message appears on the screen, indicating the selected source.
3 Use the Source button to select the required source: Auto, RGB sync,YPbPr, RGB sog, S-
Video,Video, Mutimedia, Wireless (only available on cClear wireless version), DVI-RGP,
DVI-YPbPr.
– When only one input source is connected, this source will automatically be selected (‘Auto
Source’).When more input sources are connected, the source with the highest priority will be
selected: Auto, RGB sync,YPbPr, RGB sog, S-Video,Video, Mutimedia,Wireless (only available on
cClear wireless version), DVI-RGP, DVI-YPbPr. Source selection can also be done via the ‘Source’
option in the ‘Settings’ menu.
– Every 100 hours of use, the start-up screen will display a message to remind you to clean the
dust filter.
Direct key feedback
Direct key feedback is given when settings/adjustments are made directly via the remote control or
local keyboard. Feedback is given by means of a slider, a simple dialog or a list of options.
Sliders are used when setting e.g.:
– volume;
– picture size;
– brightness;
– contrast;
– colour tracking.
Dialogs are used when setting e.g.:
– horizontal/vertical keystone;
– mirror.
Lists are used when setting/selecting e.g.:
– smart picture;
– picture format;
– source;
– language.
5. Operation
Philips Multimedia Projector 24 English User guide cClear
