<
RGBS
1 Connect an optional Scart/RCA Component Video adapter (1) to the Scart connector of
your Component- or HDTV-video equipment
2 Connect the Component in sockets of the projector (Pr/Cr,Y, Pb/Cb) to the R, G and B
outputs of the adapter.
For this, use the audio/video connection cable supplied (2).
3 Connect the Video input of the projector to the Y output of the adapter.
For this, use an optional audio/video connection cable (3).
4 Select ‘RGB sync’ or ‘RGB sog’ input by pressing the Source button.
– ‘RGB sync’ or ‘RGB sog’ appears on the screen.
• If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Video/Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (4).
– Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
Scart connection
4. Installation
Philips Multimedia Projector 22 English User guide cClear
Settop Box, etc.
