C7100/C7300/C7500 Setting up • 75
INTERFACES
Your printer is equipped with a selection of data interfaces:
1. Parallel – For direct connection to a PC. This port requires a
bi-directional (IEEE 1384 compliant) parallel cable.
2. USB – For connection to a PC running Windows 98 or above
(not Windows 95 upgraded to Windows 98) or Macintosh. This
port requires a cable conforming to USB version 1.1 or above.
• The operation of a printer is not assured if a USB compatible
device is connected concurrently with other USB-compatible
machines.
• When connecting multiple printers of the same type, they
appear as *****, ***** (2), ***** (3), etc. These numbers depend
on the order of connecting or turning on each printer.
3. Ethernet – For network cable connection. This port is standard
on all “n” models, optional on others.
NOTE
Administrator’s authority is required when installing a
network connection.
