A SERVICE OF

logo

C7100/C7300/C7500 Accessories • 401
2. Lower the printer gently on to the additional paper tray aligning
the holes and connection socket on the base of the printer with
the locating pegs and connector on the additional paper tray unit.
3. Connect the printer interface cable and power cable, then switch
on the printer.
4. Print a Menu Map (see “Printing the MenuMap” on page 35) and
check that TRAY 2 (and TRAY 3 if installed) appear under MEDIA
MENU.
5. The printer will automatically configure to include this option.
6. In the printer driver(s), change the installed memory to match the
new value:
For Windows XP: see page 81
For Windows 2000: see page 153
For Windows Me/98/95 (PostScript driver only): see page 220
For Windows NT 4.0: see page 285