65
Palameter List
PARAMETERS
4
Second functions
44
Second acceleration/deceleration
time
0 to 3600 s/
0 to 360 s
0.1 s/0.01 s 5 s 77
45 Second deceleration time
0 to 3600 s/0 to 360 s,
9999
0.1 s/0.01 s 9999 77
46 Second torque boost (Note 1) 0 to 30%, 9999 0.1% 9999 73
47
Second V/F (base frequency) (Note
1)
0 to 400Hz, 9999 0.01Hz 9999 75
48
Second stall prevention operation
current
0 to 200% 0.1% 150% 91
49
Second stall prevention operation
frequency
0 to 400Hz, 9999 0.01Hz 0Hz 91
50 Second output frequency detection 0 to 400Hz 0.01Hz 30Hz 90
Display functions
52 DU/PU main display data selection
0 to 20, 22, 23, 24, 25,
100
1092
53 PU level display data selection 0 to 3, 5 to 14, 17, 18 1 1 92
54 FM terminal function selection
1 to 3, 5 to 14,
17, 18, 21
1192
55 Frequency monitoring reference 0 to 400Hz 0.01Hz 60Hz 95
56 Current monitoring reference 0 to 500A 0.01A
Rated output
current
95
Automatic
restart
functions
57 Restart coasting time 0, 0.1 to 5 s, 9999 0.1 s 9999 96
58 Restart cushion time 0 to 60 s 0.1 s 1.0 s 96
Additional
function
59 Remote setting function selection 0, 1, 2 1 0 98
Operation selection functions
60 Intelligent mode selection 0 to 8 1 0 100
61 Reference I for intelligent mode 0 to 500A, 9999 0.01A 9999 102
62 Ref. I for intelligent mode accel. 0 to 200%, 9999 0.1% 9999 102
63 Ref. I for intelligent mode decel. 0 to 200%, 9999 0.1% 9999 102
64
Starting frequency for elevator
mode
0 to 10Hz, 9999 0.01Hz 9999 102
65 Retry selection 0 to 5 1 0 103
66
Stall prevention operation level
reduction starting frequency
0 to 400Hz 0.01Hz 60Hz 84
67
Number of retries at alarm
occurrence
0 to 10,101 to 110 1 0 103
68 Retry waiting time 0 to 10 s 0.1 s 1 s 103
69 Retry count display erasure 0 0 103
70 Special regenerative brake duty
0 to 15%/0 to 30%/0%
(Note 10)
0.1% 0% 87
71 Applied motor
0 to 8, 13 to 18, 20, 23,
24
1 0 105
72 PWM frequency selection 0 to 15 1 2 106
73 0-5V/0-10V selection 0 to 5, 10 to 15 1 1 107
74 Filter time constant 0 to 8 1 1 108
75
Reset selection/disconnected PU
detection/PU stop selection
0 to 3, 14 to 17 1 14 110
76 Alarm code output selection 0, 1, 2, 3 1 0 111
77 Parameter write disable selection 0, 1, 2 1 0 111
78
Reverse rotation prevention
selection
0, 1, 2 1 0 112
79 Operation mode selection 0 to 8 1 0 113
Func-
tion
Parameter
Number
Name Setting Range
Minimum
Setting
Increments
Factory Setting
Refer
To
Page:
Customer
setting
