Configuration 5A: R8csi <—ppp—> R8r (one C-LAN)
<—ethernet—> R8si
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
150
> Submit the screen
End
COS
The values for these fields will be specified by the system
administrator.
COR:
TN:
Node Name: The node name for the interface defined by this data module.
This must be a name entered on the Node Names screen.
Subnet Mask:
Establish
Connection?
y means that this switch will be responsible for call setup for
this connection. Enter n when administering the data module for
Switch 2.
Destination
Digits:
Trunk access code (899) plus extension of data module on
node-2 (3020).
Destination
Node Name:
Name of the node at the far end of this connection. This must be
a name entered on the Node Names screen.
CHAP? This field enables/disables the Challenge Handshake
Authentication Protocol security mechanism on this link. If you
enter y, the system will prompt for a CHAP secret (password).
Field Conditions/Comments
2 of 2
