Instructions KWPST – SW Upgrade
80-B6013-10 Rev. B Kyocera Wireless Corp. Proprietary 5
3. Once the Write process is complete,
you can exit KWPST.
4. The phone must be reset from the
Service Interface mode, and you can
accomplish this by tapping the
“Reset” icon as shown in the picture
to the left.
FYI
NOTE:
Voice tags may need to be re-recorded by the end user after this upgrade is
completed, if software in the phone was SX1.0.10 or lower. Please see tech
tip,QCP-6035 – Voice Tags Not Registering (80-B6893-9) for details.
For more information, contact:
KWC Customer Care Center Toll-free: 1-(888) 236-2746 (US and Canada ONLY)
KYOCERA WIRELESS CORP. Direct: 1-(858) 882-1400
10300 Campus Point Drive Fax: 1-(858) 882-1717
San Diego, CA 92121 USA E-mail: phone-help@kyocera-wireless.com
The use of this document does not imply authorization to service product in warranty on KWC's behalf. Reimbursement for service on an in-
warranty product is provided only to Authorized Service Centers (ASC). Non-authorized facilities attempting to service Kyocera products will void
the consumer limited warranty.
DATA AND INFORMATION CONTAINED IN OR DISCLOSED BY THIS DOCUMENT IS PROPRIETARY INFORMATION OF KYOCERA
WIRELESS CORP. BY ACCEPTING THIS MATERIAL THE RECIPIENT AGREES THAT THIS MATERIAL AND THE INFORMATION
CONTAINED THEREIN IS HELD IN CONFIDENCE AND TRUST AND WILL NOT BE USED, COPIED, REPRODUCED IN WHOLE OR IN
PART, NOR ITS CONTENTS REVEALED IN ANY MANNER TO OTHERS WITHOUT THE EXPRESS WRITTEN PERMISSION OF KYOCERA
WIRELESS CORP.
This technology is controlled by the U.S. Government. Diversion contrary to U.S. law prohibited.
Copyright © 2001-2002 Kyocera Wireless Corp. All rights reserved. Printed in the United States of America.
Most Current version of this and all service docs may be found here: www.kyocera-wireless.com/extranet
14
