KWPST – SW Upgrade Instructions
2 Kyocera Wireless Corp. Proprietary 80-B6013-10 Rev. B
1. Open the flip
2. Remove the battery door.
3. (a)Hold the page-down navigation
button on the front lower center
portion of the phone and (b)Press the
reset button with the stylus.
4. Release the stylus. A blinking dot
should appear in the upper left-hand
corner.
5. Release the page-down navigation
key.
FYI
Note:
It is recommended that you have the
power source applied during the software
upgrade process.
6. Place the Smartphone to its charging
cradle or data programming cable.
7. On the computer, launch the KWPST
Software Download application. To
Start, select the Windows Start menu
: Programs : Kyocera Wireless PST :
Software Download.
FYI
Note:
Make sure that the HotSync Manager or another application is not occupying the
COM port to which the cradle is attached.
8. Select the Smartphone Download tab.
9. The dialog should state that a
Smartphone in Download Mode has
been detected.
3b
3a
8
9
7
