KWPST – SW Upgrade Instructions
4 Kyocera Wireless Corp. Proprietary 80-B6013-10 Rev. B
FYI
Note:
Make sure that the HotSync Manager or another application is not occupying the
COM port to which the cradle is attached.
1. On the computer, launch the KWPST
Software Download application. To
Start, select the W indows Start menu :
Programs : Kyocera Wireless PST :
Software Download.
2. Select the “Software Download” tab.
3. The dialog should note that a QCP-
6035 has been detected.
4. Browse to select the appropriate *.hex
or *.hxb file to place in the phone.
(KZ1.1.21.HEX)
5. Press Start button.
6. Once download is completed, leave
phone in service interface mode and
follow steps below (update QCN file.)
Update QCN file
1. Select the “Restore” Tab.
2. Browse to select the appropriate
*.qcn file.
3. Press Start button
2
4
5
3
1
2
3
