50 Using Voice Recognition
To activate the Voice Wake-up setting:
• Select Menu → Settings →
Voice Features → Voice Wake-Up →
With accessory
.
To wake up the phone:
1. Say Wake Up and listen for a tone.
2. Say Wake Up again until you hear two tones.
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 51.
Answering the phone
You can set the hands-free car kit to either (1) answer
automatically or (2) answer using a
voice command.
Answering automatically
• Select Menu → Settings → Accessories →
Auto-Answer → After 5 seconds.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed Kyocera hands-free car kit.
To turn off Auto-Answer:
• Select
Menu → Settings → Accessories →
Auto-Answer → Disabled.
To activate the Voice Answer setting:
1. Select Menu → Settings →
Voice Features
→ Voice Answer → Enabled.
2. Select Menu → Settings → Silent Mode →
Normal Sounds.
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
saved contact entry, then the phone says “Incoming
call from (Name), answer?”
• Say
Yes or press any key except .
Ignoring an incoming call
To ignore an incoming call, do one of the following:
• Say No and press to silence the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Using Expert Mode
Expert Mode allows you to use voice recognition at
a faster pace by reducing the number of voice
instructions and replacing them with tones.
Simply speak a command after the tone.
• Select
Menu → Settings → Voice Features→
Expert Mode → Expert.
82-N8190-1EN.book Page 50 Friday, January 27, 2006 11:09 AM
