34 Sending and Receiving Text Messages
T2T call
When your phone receives a T2T call, it sounds a
tone and you will hear the caller speaking through
the speakerphone.
• To speak, press and hold the walkie-talkie
button. To listen, release the walkie-talkie
button. To end the call, press .
Once the T2T call has ended, your phone returns to
the text message screen that was open.
T2T alert call
When your phone receives a T2T alert, it sounds the
“T2T Alert” tone. The message “Incoming Alert”
appears on the screen with the phone number or
contact name of the caller.
• To ignore the alert, press to select
Ignore
or press the speakerphone button on the top of
the phone.
• To answer, press and release the walkie-talkie
button or press to select
Answer.
To speak, press and hold the walkie-talkie
button. To listen, release the walkie-talkie
button. To end the call, press .
Once the T2T call has ended or you have ignored
the alert, your phone returns to the text message
screen that was open.
Standard call
When a standard call comes in, the phone
rings and an incoming call message appears on
the screen.
• If you don’t wish to answer the call, press
to select
Options and then press to select
Ignore.
To answer the call, press . The message you
were working on will be saved in the Drafts folder.
To return to the message, press to open the
Text menu, select Drafts and select the message.
Viewing your sent messages
To save your outgoing messages, you must first
enable Save to Sent.
1. Select Menu → Messages →
Msg Settings → Save to Sent.
2. Select an option and press .
– Prompt allows you to choose whether or not
to save your message when you send it.
–
Enabled automatically saves all successfully
sent messages in the Sent folder.
82-N8190-1EN.book Page 34 Friday, January 27, 2006 11:09 AM
