23
Secure channel with PIN
If your single-cable system allows the transmission frequency to be protected by entering a PIN, this
is the menu for defi ning the PIN. No other receiver can then use that transmission frequency unless
the PIN is input.
Select the setting “Yes” using the
buttons. A line with the text “Password PIN” is then displayed.
Press the
buttons to select this line. You can now use the number buttons to enter a PIN (0-255).
FIRST INSTALLATION: Single-cable system (manual)
If no connection to the single-cable system could be established, the following display appears:
Check your settings (frequency and transmission channel) and if necessary call for expert help.
Press the
button to acknowledge this display. Then press the
button. You will be asked whether you
wish to save the changes. Use the
buttons to select “Yes, save changes” and confi rm by pressing
the
button. Now press the
!
(green) button.
The receiver will automatically display the menu for the channel search. Continue with the section (Execute
channel search).
Test connection
When you have completed all the settings, press the
buttons to switch to the “Test connection”
selection fi eld and press the
button. The receiver now tests whether a connection to the single-
cable system can be established or not. As soon as the receiver has established a connection to
the single-cable system, you will see the following display:
