A SERVICE OF

logo

14
FIRST INSTALLATION
System
Select the setting here to match your reception system using the

buttons. You have the following
options:
- DiSEqC™1.0
- One Cable
- LNB only
If your reception system supports DiSEqC™, in “System” select “DiSEqC™1.0” (is used for switch-
over from one received satellite to another). If your reception system does not support DiSEqC™,
select the setting “LNB only”. If your receiver is connected to a single-cable system, select “One Cable”.
Press the
button to move to the next menu item.
Continue with the relevant section of “First Installation”.
When selecting the satellite(s), make sure that your reception position is aligned
to the desired satellite(s)!
The following display appears: