A SERVICE OF

logo

Open as PDF
next previous
Adding and removing satellites
Adding and removing satellites
Setting up a satellite
Naturally, the LNB can also accommodate new satellites.
In order to do so, the orbit position, which you need to take a bearing
on, must be known. The “Antenna settings“ menu entry in the
installation menu can be used as an aid for alignment of the antenna.
Access the menu item "LNB configuration" via the main menu
M
and the „Installation“ - submenu with the
ou and O buttons
(plus password, if activated). You select it with
O and can then enter
or select a new satellite.
Remember that your system must be set-up accordingly!
42