Programme selection
Programme selection
This section describes how you select TV programmes with your
receiver and how you can set the desired volume.
For this description of the functions, it is assumed that the receiver
has been connected correctly.
If you wish to connect the receiver yourself, please read the section
"Connection and start-up" beforehand.
Selecting a TV programme
Reception status
The following information describes how to select other channels and
shows what the on-screen displays look like. After switching on the
receiver, simply press the ou buttons in order to select other
TV programmes in their ascending or descending order in the channel
memory.
Every time you press the button, an on-screen display shows you the
selected programme together with the time, the programme start and
end times as well as the programme title in the information box,
provided this data is transmitted together with the signal.
Press the
O button and this information box is permanently
displayed. Press the button once more and the display disappears.
You will receive the "channel scrambled" message for scrambled
channels.
You can receive this programme with the UFD 515 only with CA
module and card.
21
