A SERVICE OF

logo

Release latch
Power supply
6. Remove the power supply and power supply filler from the server by pressing
down on the release latch while you pull out.
Power-supply
cage assembly
Power-supply
cage handle
7. Lift the power-supply cage handle on the rear of the power-supply cage, and
rotate the power-supply cage out of the way until it latches in place. Let the
power-supply cage rest on the rear power-supply structure support bracket.
8. Install the transition duct on the edge of the DIMM air baffle.
20 IBM System x3500 Type 7977: Installation Guide