A SERVICE OF

logo

Chapter 8. Maintaining the Printer 8–5
4. Clean the surface with the brush and remove any dirt.
5. After you clean the window, replace the wire cleaner in its storage place
and close the top cover and the front door. Turn on the printer to resume
printing.
Cleaning the Fuser Rollers
<2-6> CAUTION:
High temperature. Switch off printer power and allow at least 15 minutes for
parts in this area to cool before handling.
Use a lint-free cloth to gently wipe the fuser rollers. This removes any toner
residue, dust, or lint.